Top Page > Advanced Instructions > Adjusting the Image Position > Adjusting the Image Position on Side 2 in Alignment with Side 1 (Registration to Align Front and Back Images Using Template) > Service Technician Procedures: Front and Back Registration Adjustment by Using NICE (Copier Model Only)
Service Technician Procedures: Front and Back Registration Adjustment by Using NICE (Copier Model Only)
Objective: For faster and easier adjustments compared to adjustments using the [Adjustment Settings for Skilled Operators] menu.
Method
Adjustments |
Method |
Registration |
Adjust the leading edge of the front side to match with the back side. |
Magnification |
Adjust the image size of the back side to match with the front side. |
Requirements (and Limitations)
Papers applied with Custom Paper Settings
Papers of the following sizes: SRA3, A3, 13” x 19”, 12” x 18”, 11” x 17”, 315mm x 450mm, 318mm x 469mm
Reference side: front side
Image skew must be corrected in advance.
Procedure
Press ‘Registration adjustment’ on the main menu screen.
Press ‘Select’ to print out the test charts.
3 sheets of the following chart will be printed in duplex along with a few blank sheets.
Place the chart on a table so that the side indicated ‘First’ [A] faces up and fold the 4 corners along the dotted lines as shown below. Do the same for the remaining 2 charts.
Place the chart on the contact glass so that the side indicated ‘Second’ [A] faces up.
Scan the first side of all 3 charts. The software application contained in the NICE SD card reads the distance between the trim lines and folded on all 4 corners from the scanned data.
On the table, fold the 4 corners in the opposite direction so that the corners appear on the side indicated ‘Second’ [A] faces up. Do the same for all 3 charts.
Place the chart on the contact glass so that the side indicated ‘First’ [A] faces up.
Scan the second side of all 3 charts. With the measurements obtained in steps 6 and 7, SP values for front and back registration are corrected.
Print out the trimming chart to check the results.
