Skip header
 

Top Page > Advanced Instructions > Adjusting the Image Position > Adjusting the Image Position on Side 2 in Alignment with Side 1 (Registration to Align Front and Back Images Using Template) > TCRU Procedures: Preparations

TCRU Procedures: Preparations

Before adjusting image positions, perform the following:

  1. Prepare the template file.
    The templates for each paper size are included as PDF file on the CD-ROM provided with this machine.

    Paper size of PDF file templates

    A3 SEF, A4 SEF/LEF, A5 SEF, A5 LEF, A6 SEF, B4 SEF, B5 SEF/LEF, B6 SEF, DLT SEF, Legal SEF, Foolscap SEF, Letter SEF/LEF, Government LG SEF, 8Kai SEF, 16 Kai SEF/LEF, 12x18, 11x15, 11x14, 10x15, 10x14, 13x19.2, 13x19, 12.6x19.2, 12.6x18.5, 13x18, SRA3, SRA4 SEF/LEF, 226x310 SEF/LEF, 310x432, 318x469 SEF, A3Plus SEF

    Unsupported paper types

    • Automatic duplex printing not possible: index paper, tracing paper, labels, envelops, magnetic paper, clear file folders

    • Paper which is fed by canceling the detection sensor for the paper trailing edge: Hole-punched paper, preprinted paper, letterhead

    • No restrictions for paper thickness

  2. A stainless-steel ruler of at least 500mm (graduations of 0.5mm) and a magnifying glass are required to measure the template.

  3. Pre-register the type of paper in use as a custom paper.

  4. Adjust the image position on 1st side (refer to previous section).

  5. Confirm that the following setting values are “0” in [Advanced Settings] for the custom paper. If other values are set, change them to “0”.

    • [Adj Image Position of Side 2 With Feed]

    • [Adj Image Position of Side 2 Across Feed]

    • [Adj Magnification of Side 2 With Feed]

    • [Adj Magnification of Side 2 Across Feed]