Adjusting the Image Position on Side 1
Perform the solution described in "(a) Adjust the image skew" and then "(b) Adjust the image position".
(a) Adjust the image skew
Print the image in black and white.
Check the direction of the skew.
In the [Adjustment Settings for Skilled Operators] menu, adjust the value of [0107: Perpendicularity Adjustment].
Press [+] to skew the image counterclockwise or [-] to skew it clockwise.
It is not possible to adjust image skew separately for the side 1 and side 2.
Print the image in black and white.
Gradually increase the value and check the printed image.
If the problem is resolved, go to the next step.
If the problem persists even though the setting has reached its maximum value, contact your supervisor.
Execute color registration.
In executing color registration, the black adjustment will also be applied to cyan, magenta, yellow and special color.
Special color mode is available for 5 station models.
When it is difficult to adjust image skew on actual print documents: in [Advanced Settings] for the custom paper customer is using, select [Registration to Align Front and Back Images Using Template] and then perform simplex printing for the template. Use the printed template.
The paper skew can not be adjusted with [Perpendicularity Adjustment]. For details about adjusting paper skew, see Skew
in Troubleshooting.
(b) Adjust the image position (Center of paper leading edge)
Move the image up/down and left/right to adjust the center position [b] of the paper leading edge.
Adjust the image position in [Advanced Settings] for the custom paper.
[Adj Image Position of Side 1 Across Feed]
[Adj Image Position of Side 1 With Feed]If custom paper is not used, adjust the image position in the following [Adjustment Settings for Skilled Operators] menu.
[0101: Adjust Image Position Across Feed Direction]
[0102: Adjust Image Position With Feed Direction]For this adjustment item, it is not possible to adjust [c] and [d]. Therefore we recommend pre-registering the type of paper in use as a custom paper and then performing adjustment.
If the problem persists even though you have adjusted the setting to its maximum and minimum values, contact your supervisor.
When it is difficult to adjust image skew on actual print documents: in [Advanced Settings] for the custom paper customer is using, select [Registration to Align Front and Back Images Using Template] and then perform simplex printing for the template. Use the printed template.
(c) Adjust the image position (Corners of paper leading edge)
Shrink/expand the image in the vertical direction and then adjust the image width (distance between [c] - [c]).
In [Advanced Settings] for the custom paper customer is using, adjust the vertical scaling.
Change the value in [Adj Magnification of Side1 With Feed].
Press [+] to increase the scaling and [-] to decrease it.
Print the image and check the image position.
To adjust the following settings, pre-register the type of paper in use as a custom paper.
When it is difficult to adjust image skew on actual print documents: in [Advanced Settings] for the custom paper customer is using, select [Registration to Align Front and Back Images Using Template] and then perform simplex printing for the template. Use the printed template.
(d) Adjust the image position (front corner of paper trailing edge)
Shrink/expand the image in the cross direction and then adjust the image length ([d] position).
In [Advanced Settings] for the custom paper customer is using, adjust the horizontal scaling.
Change the value in [Adj Magnification of Side1 Across Feed].
Press [+] to increase the scaling and [-] to decrease it.
Print the image and check the image position.
To adjust the following settings, pre-register the type of paper in use as a custom paper.
When it is difficult to adjust image skew on actual print documents: in [Advanced Settings] for the custom paper customer is using, select [Registration to Align Front and Back Images Using Template] and then perform simplex printing for the template. Use the printed template.
