Solution
Register the applicable paper brand as ”Custom Paper”.
In Custom Paper Settings > Fusing Heat Roller Temp. Adjust. (No.85/86), enter a value equal to the “current value +5 deg”.
Print the image. (more than 50 sheets in A4 LEF paper feed conversion)
Is the printed image acceptable?
Yes: Go to next step.
No: Go to step 2 (upper limit of 185°C).
Is the fusing level acceptable? *1
Yes: Finish
No: No further improvement can be expected in the field.
*1: Guidelines for Fusing Quality
No image peeling.
No toner peeling even when rubbing the image gently with fingernails.
No toner peeling even when rubbing the image with the optical cloth.
After taking the above measures, do the color calibration adjustment of the external controller.
The applicable numbers for the items in the “Custom Paper Settings” vary depending on the printing mode of the machine. Refer to Applied Setting Items for Custom Paper Setting
about which number you need to adjust.
