Solution 2 (Customer Engineer only)
Set the settings of SP3-539-010 (Dev Agitating Time :Set; ON/OFF(by AbsHum)) and SP3-539-030 (Dev Agitating Time :Set; ON/OFF(by Non-use Time)) to “0 (ON)”.
When setting above SP modes to “ON,” the following SP setting values become effective. For the following SP modes, it is possible to adjust the absolute humidity threshold and developing agitation time for each threshold.
SP |
Initial Value |
|---|---|
SP3-539-021 (Dev Agitating Time :Set : AbsHum Threshold:1) |
3.0 g/m3 |
SP3-539-022 (Dev Agitating Time :Set : AbsHum Threshold:2) |
3.0 to 7.0 g/m3 |
SP3-539-023 (Dev Agitating Time :Set : AbsHum Threshold:3) |
7 to 12.0 g/m3 |
SP3-539-024 (Dev Agitating Time :Set : AbsHum Threshold:4) |
12.0 to 24.0 g/m3 |
SP3-539-025 (Dev Agitating Time :Set : AbsHum Threshold:5) |
24.0 g/m3 |
SP3-539-011 (Dev Agitating Time: by AbsHum:1) |
0 sec |
SP3-539-012 (Dev Agitating Time: by AbsHum:2) |
5 sec |
SP3-539-013 (Dev Agitating Time: by AbsHum:3) |
10 sec |
SP3-539-014 (Dev Agitating Time: by AbsHum:4) |
15 sec |
SP3-539-015 (Dev Agitating Time: by AbsHum:5) |
20 sec |
SP3-539-016 (Dev Agitating Time: by AbsHum:6) |
25 sec |
Changing the settings of SP modes above may cause the following side effects.
The warm-up time or recovery time from the energy saver mode is always longer than before.
The machine may take additional time to warm up or recovery even when the no adjustment time is required.
Increasing agitation time may cause the part’s life time of the cleaning unit shorten, scraping of the drum, or mottled effects due to deterioration of developer.
