Skip header
 

Top Page > Image Quality Problem: Full Page > Uneven Density > Uneven Density: 189 mm Interval (1) > Solution

Solution

1Execute [DEMS] in “0201 [Adjust Image Density/DEMS]” (SP3-040-001), and then check the output image.

2Align the drum shaft*1.

3Execute [DEMS] again, and then check the output image.

*1: Align the direction of the white marking position [B] on the drum shaft with the notch mark [A] on the top of the drum gear.

d194d4389.jpg

Note

  • After taking the above measures, do the color calibration adjustment of the external controller.