Solution
Fusing temperature adjustment
*1: Increasing the fusing temperature may cause the following side effects.
Paper curling (including paper jams)
Glossy streaks
Less glossiness
*2: If the side effects described above occur, set the fusing temperature to a value at which the problem does not occur (between the initial value and 180°C).
Process Speed Adjustment
*3: Productivity of the machine is reduced after the setting of “Process Speed Setting” has been changed.
[High] (75 ppm) => [Middle] (52.5 ppm),
[Middle] (52.5 ppm) => [Low] (37.5 ppm)
After taking the above measures, do the color calibration adjustment of the external controller.
The applicable numbers for the items in the “Custom Paper Settings” vary depending on the printing mode of the machine. Refer to Applied Setting Items for Custom Paper Setting
about which number you need to adjust.
