Skip header
 

Top Page > Image Quality Problem: Lines > Streaks > Glossy Lines at the Edge of the Paper > Solution

Solution

1Execute “0506: [Smooth Fusing Belt] – [For Belt Scratches] (SP1-133-110)” in the “Adjustment Settings for Skilled Operators”.

When executing once, fusing belt smoothing is performed for 90 seconds.

2Print the target image (1 sheet).

3Is the printed image acceptable?

Yes: Finish

No: Go to step 1.

4If the problem is not solved with measures above, replace the fuser belt.

Note

  • After taking the above measures, do the color calibration adjustment of the external controller.