Skip header
 

Top Page > Image Quality Problem: Lines > Streaks > Vertical Black Streaks > Solution

Solution

1Register the problem paper brand in the “Custom Paper Settings” if it is not registered.

2Check the current value of 104: [Fusing Feed Speed Adjustment] in the “Custom Paper Settings”.

3Is the value +2.5 or higher?

Yes: No applicable measures

No: Go to next step.

4Gradually increase the value of 104: [Fusing Feed Speed Adjustment] by 0.5%, and then try printing the target image again.

5Is the problem solved?

Yes: Finish

No: Repeat step 4. (Upper limit is +2.5%. There is no additional effect when increasing the value above +2.5%.)

Note

  • Increasing the value of 104: [Fusing Feed Speed Adjustment] may cause the black streaks, glossy streaks, or condensation image worse.