Skip header
 

Top Page > Improving Throughput > Improving Throughput > Reducing the Waiting Time > Solution

Solution

  1. Check the temperature of [Fusing Heat Roller Temperature Adjustment] for custom paper settings (No. 085/086).

  2. If the target fusing temperature of paper using frequently is less 160°C, modify “Adjustment Setting for Skilled Operators” of 0207: [Standby Target Temp. Setting] as follow:

    Change all values to the default minus 10°C:

    • Standby: Center (SP1-107-001)

    • Preheat: Center (SP1-107-003)

    • Print Ready: Center (SP1-107-007)

  3. Register paper as custom paper setting.

  4. Set [Setting custom paper settings: Adjust fusing temperature to transfer paper] (089, 090, 091, 092) to “1”.

Note

  • The applicable numbers for the items in the “Custom Paper Settings” vary depending on the printing mode of the machine. Refer to Applied Setting Items for Custom Paper Setting about which number you need to adjust.

  • After taking the above measures, we recommend performing color calibration again for the external controller.

Note

  • After changing [Adjust fusing temperature to transfer paper], there might be some differences in gloss level or fusing intensity.