Z-Folding Is Not Performed Correctly
The delivered paper has an upward curl with a arc of 4 cm (1.6”) or less at leading edge.
Solution:
Is the decurl unit installed?
Yes
Go to the next step.
No
Go to Step 4.
On the machine operation panel: Adjustment Settings for Skilled Operators > Paper Feed/ Output > Set Adjust Paper Curl to Adjust Concave Curl: Weak. (SP 1-906-001 to 012: De-curler Setting Tray <number>:Paper Path Selection)
Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
Load the paper the other way up.
Print the image. Is the problem resolved?
Yes
Finished!
No
Consult key operators.
This folding error will not occur if uncurled paper is used or sheets that curl downward.
