Solution
Table 1
Change all of the 5 setting items shown below.
No. |
Custom Paper Settings |
Details of Change |
|---|---|---|
1 |
090 [Adj Fsng Tmp to Trnsf Ppr:Ppr: Qual] 092 [Adj Fsng Tmp to Trnsf Ppr:Ppr: Qual: S] |
Change the setting to “1” |
2 |
093 [Adjust Adding Fusing Temperature 1] 094 [Adjst Addng Fusng Tempratre 1: Special] |
Change the setting to “0” |
3 |
095 [Adjust Adding Fusing Temperature 2] 096 [Adjst Addng Fusng Tempratre 2: Special] |
Change the setting to “15”, if Process Speed Setting is [High] or [Middle]. Change the setting to “5”, if Process Speed Setting is [Low]. |
4 |
131 [Rdc. Init. CPM: Low Tmp. Envir.: Prod]. 132 [Rdc. Init. CPM: Low Tmp. Envir.: Qual.] |
Change the setting to “Level 3” |
5 |
133 [Rdc. In. CPM: N./H. Temp. Envr.: Prod.] 134 [Rdc. In. CPM: N./H. Temp. Envr.: Qual.] |
Change the setting to “Level 3” |
*2 A4 LEF/LT more than 10 sheets
Chart A
*2: A4/LT LEF more than 10 sheets.
*3: Guidelines for Fusing Quality
No image peeling.
No toner peeling even when rubbing the image gently with fingernails.
No toner peeling even when rubbing the image with the optical cloth.
After taking the above measures, do the color calibration adjustment of the external controller.
The applicable numbers for the items in the “Custom Paper Settings” vary depending on the printing mode of the machine. Refer to Applied Setting Items for Custom Paper Setting
about which number you need to adjust.
