Top Page > Troubleshooting: Paper Delivery Problems > Main Machine Paper Transport Problems > White Spots Due to Paper Dusts > Cleaning the Paper Feed Unit of Vacuum Feed LCIT (RT5100)
Cleaning the Paper Feed Unit of Vacuum Feed LCIT (RT5100)
Paper Feed Belt Unit
|
[A]: Tray 1 Paper Feed Belt Unit [B]: Tray 2 Paper Feed Belt Unit |
Open the paper tray.
Unlock the paper feed belt unit (
x2).
Hold the knob of the paper feed belt unit [A] and close the paper tray halfway.
Pull out the paper feed belt unit [A] and the paper tray together.
The paper feed belt unit must be pulled out horizontally relative to the paper tray, to ensure that the paper feed belt is not damaged by getting caught in the side fences or other parts.
To prevent damaging the paper feed belt when you return the paper feed belt unit to its original position, align the right and left guides [A] with the rail [B] on the paper tray side and raise them slightly before replacing the unit.
Turn upside down the paper tray pulled out, and wipe the paper feed belt [A] with a damp cloth.
Open and clean the front door, Open/close guide plates [A], [B].
Close the guide plates and front door.
