No. |
Item |
Details |
Values |
|---|---|---|---|
1 |
Sub Scan Magnification |
Specify the sub scan magnification. |
-8 to 8 (0.1% steps) |
2 |
Transfer Roller Bias |
Adjust the transfer roller bias. |
-10 to 10 (12 steps) |
3 |
Image Density |
Adjust the image density. |
-3 to 3 (7 steps) |
4 |
PNP ID |
Specify the Plug and Play ID. Normally, do not change the PNP ID. After replacing the main board, return the PNP ID to its original value. |
0 to 255 |
5 |
Destination Code |
Specify the area where the machine is sold and used. This setting is important. It determines the following: • Default paper size. LT for NA, and A4 for all other areas. • Units of measure: inches for NA, and millimeters for all other areas. • Fixed steps for reduction/enlargement. Normally, do not change the destination code. After replacing the main board, return the destination code to its original value. |
0 to 255 |
6 |
SC 559 Detection |
SC 559 is the error code for Fusing Unit Third Jam Error (Fatal Error). Specify whether to enable SC 559 detection. |
0: Off 1: On |
7 |
Plate Control Mode |
Specify whether to use the plate control mode. |
0: On 2: Off |
8 |
Low Humidity Mode |
Black lines a few millimeters thick may appear on prints when the machine is operated in a low humidity environment. Enabling this mode may help to solve the problem. |
0: Off 1: On |
9 |
Primary Cooling Mode |
Specify whether to use the primary cooling mode. |
0: Off 1: On |
10 |
Serial No. |
The serial number of the machine is displayed. Normally, do not change the serial number. After replacing the main board, return the serial number to its original value. |
- |
11 |
AC Power Unstable Times |
AC power unstable times are displayed. |
0 to 99999999 |
12 |
Serial No_Engine |
The serial number of the engine is displayed. Normally, do not change the serial number. After replacing the main board, return the serial number to its original value. |
- |
13 |
Rom Ver |
The ROM version number is displayed. |
- |
14 |
Total Counter (Engine) |
The total counter is displayed. |
0 to 99999999 |
15 |
2nd Serial No. |
Do not change the 2nd Serial No. |
- |
