Skip header
 

Upload (Backup) to SD Card

1Prepare a formatted SD card.

2Make sure that the write-protection on the SD card is off.

3Turn off the main power switch.

4Remove the SD card slot cover [A] (_screw.pngx 1), and then install the SD card into the SD card slot 2 [B] (for service use).

m158m0075.jpg

5Turn on the main power switch.

6Enter the SP mode, and then execute SP5-846-051 (Backup All Addr Book).

7Exit from the SP mode, and then turn off the main power switch.

8Remove the SD card from the SD card slot 2.

9Install the SD card slot cover.

Note

  • If the capacity of SD card is not enough to store the local user information, an error message is displayed.

  • Carefully handle the SD card, which contains user information. Do not take it back to your location.

PreviousNext