Be careful not to break the fusing lamp when removing/attaching screws. Insert a pin or jeweller’s screwdriver into the service hole (see the lower red circle in the photo below), and hold the flat nut with your finger (see the upper red circle in the photo). Otherwise, the lamp secured together with the flat nut moves with rotation of the screw, which causes a lamp breakage.
Separate the fusing unit into the upper and lower fusing units (Upper Fusing Unit, Lower Fusing Unit
).
Guide [A]
There is a C-shaped cutout at the right side of the guide.
Cover [A] (
Screws of the fusing lamp (
Two brackets [A]
Pull out the fusing lamp [A].
Hot Roller [A].
When installing a new hot roller, removing the guide [A] helps you install the hot roller more easily.
