Enter the SP mode and select SP2-109-003 (Pattern Selection).
Select the test pattern for print from the list then press [OK].
To change the density of the test pattern, select the density with SP2-109-006, then press [#].
If select "0" with SP2-109-006, the color adjusted so will not show up in the test pattern.
To print, touch [Copy Window], then set settings within the following window for test print (paper size etc…).
Press [Start] to start test print.
After checking test pattern, press [SP Mode] to return to SP mode display.
Reset all settings to the default values (SP2-109-003, SP2-109-006).
Exit SP mode.
No. |
Pattern |
No. |
Pattern |
|---|---|---|---|
0 |
None |
13 |
Independent Pattern (4dot) |
1 |
Vertical Line (1 dot) |
14 |
Trimming Area |
2 |
Vertical Line (2 dot) |
15 |
Hound's Tooth Check (Horizontal) |
3 |
Horizontal Line (1 dot) |
16 |
Hound's Tooth Check (Vertical) |
4 |
Horizontal Line (2 dot) |
17 |
Black Band (Horizontal) |
5 |
Grid Vertical Line |
18 |
Black Band (Vertical) |
6 |
Grid Horizontal Line |
19 |
Checker Flag Pattern |
7 |
Grid Pattern Small |
20 |
Grayscale (Vertical) |
8 |
Grid Pattern Large |
21 |
Grayscale (Horizontal) |
9 |
Argyle Pattern Small |
22 |
Two Beam Density Pattern |
10 |
Argyle Pattern Large |
23 |
Full Dot Pattern |
11 |
Independent Pattern (1dot) |
24 |
All White Pattern |
12 |
Independent Pattern (2dot) |
