Open the ARDF upper cover [A].
Remove the ARDF rear cover [A]. (hook×4)
Be careful not to damage the hooks on the ARDF rear cover when you remove or install the ARDF rear cover.
Disconnect the eight connectors from the rear side of the ARDF.
Release the harness from the harness guides.
Remove the ARDF inverter motor unit [A]. (hook×1)
The screw [B] is a ground screw. Be careful not to use the wrong screw when installing the ARDF paper feed motor and ARDF paper transport motor.
Remove the ARDF paper feed motor and ARDF paper transport motor [A].
