Operation Panel

Remove the following covers.

• Scanner front cover (Scanner Front Cover)

• Right lower cover (Right Lower Cover)

Disconnect the USB cable [A].

Release the USB cable [A] from the harness guides.

Release the two hooks from the operation panel arm upper cover [A].

Insert a flathead screwdriver into [A] to release the hook, and then remove the operation panel arm upper cover [B].

Remove the ground screw and disconnect the connector.

Pull out the USB cable [A].

Remove the operation panel [A] from the mainframe.

Remove the rear center cover [A].

Remove the rear right cover [A] and rear left cover [B].

Remove the right hinge cover [A] and left hinge cover (lower) [B].

Remove the left hinge cover (upper) [A] and left hinge cover (left) [B]. (hook×2)

Remove the right hinge [A] and left hinge [B].

Remove the USB cable [A] and ground cable [B].