The parts mentioned in the table have a target yield. However, the total copy/print volume made by the machine will not reach the target yield within the machine’s targeted lifetime if the machine is used under the target usage conditions (ACV, color ratio, P/J, and C/O). So, these parts are categorized not as PM parts but as yield parts (EM parts).
Enter the SP mode.
Output the SMC logging data with SP5-990-004.
Set SP7-804-002 to "1".
Item |
SP |
|---|---|
Drum unit Development unit Fusing unit Transfer unit Paper feed roller Pickup roller Separation roller Feed roller assy (ARDF)*1 Separation pad (ARDF) *1 |
SP7-804-002 |
*1 Only for MP 501/601
Exit the SP mode.
Turn OFF the main power.
Replace the yield parts and turn ON the main power.
The machine will reset the PM counter.
