Installing the main machine on the optional paper feed unit

Install the main machine [A] on the optional paper feed unit [B].

Open the rear lower cover [A] of the main machine.

Install the joint bracket E [A] on the rear right side to secure the main machine and paper feed unit.

Open the rear cover [A] of the paper feed unit, and then secure the joint bracket installed in the previous step with the screw (M3×6).

Install the joint bracket D [A] on the rear left side to secure the main machine and paper feed unit.

Open the rear cover [A] of the paper feed unit, and then secure the joint bracket installed in the previous step with the screw (M3×6).

Remove the paper feed tray [A] of the main machine by pulling it out.

Install the joint bracket C [A] on the front side to secure the main machine and optional paper feed unit with the tapping bind screw (3×8).

Put back the paper feed trays.

Attach the two stands [A] provided with the caster table on the front and left sides with the screws (polished round/spring (M4×10)).

Attach the two stands [A] provided with the caster table on the rear and right sides with the screws (polished round/spring (M4×10)).