Meter Click Charge

There are two ways to set up this function.

Meter click charge enabled (SP5-930-001 set to "1 (enabled)"; this is the default setting): The counter can be displayed and printed by the customer. The service representative can then call the customer and ask for the counter.
Meter click charge disabled (SP5-930-001 set to "0 (disabled)"): The counter cannot be displayed or printed by the customer. To check the counter, the service representative must print the SMC report (SP 5-990).

Item	SP No.	Function	Default
Meter Click Charge	SP5-930-001	Enables or disables Meter Click Charge. When enabled: The counter menu shows immediately after you push the "Menu" key. In MP 501/601, "Counter Method" (SP5-045-001) sets the type of the counter. You can print the counter from the counter menu. When disabled: The counter menu does not show.	1: ON
Meter Click Charge: Maintenance Kit	SP5-931-001	Enables or disables the PM alert for the maintenance kit. * This setting is unnecessary with this machine since this machine does not have the maintenance kit.	1: No alert
Counter Method (MP 501/601 Only)	SP5-045-001	Specifies the counter display method. 1: 1 counter mode Displays only the total counter. 2: 2 counter mode Displays the total counter and the print counter.	1: 1 counter mode
Service Tel: Telephone/Facsimile	SP5-812-001, -002	-001: shows or sets the telephone number of the service representative. -002: shows or sets the fax number of the service station. This number is displayed on the error message screen when an SC occurs.	-