Replacement and Adjustment
Notes on the Main Power Switch
Characteristics of the Push Switch (DC Switch)
Opening and Closing the Machine
Paper Exit Cover, Paper Exit Guide Plate
Original Set Sensor, Original Width Sensor
Around the Drum, Development Unit
Development Unit Gear Replacement
Bypass Set, Bypass Registration Sensors
Used Toner Bottle Full Sensor/ Temperature/humidity sensor
Entering Developer Lot Numbers
Cutter Motor, Cutter HP Switches
Cutting Sensor, Feed Exit Roller
Paper Transfer, Transport Unit
Important Note Regarding Fusing Unit Replacement
Paper Junction Gate Solenoid/Exit Sensor
FPDB (Fusing Pressure Drive Board)
Pressure Roller Center Thermistor
Pressure Roller End Thermistor
Important Notes about HDD Replacement
To Print the CIS Adjustment Pattern
To Adjust the Image at the CIS Joints
To Adjust the Scan Speed Switching
Doing SP Adjustment Settings for a Replacement LPH
Main Scan Adjustment: White or Black Vertical Lines
Main Scan Adjustment: LED Light Level at LPH Joints
LPH Density Adjustment with SP Codes
To Print the IPU Test Pattern 27
Image Position, Magnification, Margin Adjustments
(2) Printer Magnification Adjustment
(3) Print and Erase Margin Setting
(4) Printer Leading Edge and Side-to-Side Registration
(5) Restoring the Printing and Scanner Erase Margin Setting
(6) Printer/Scanner Magnification
(7) Printer/Scanner Leading Edge Registration
(8) Printer/Scanner Side-to-Side Registration
(9) Printer Cut Length Adjustment
(10) Printer/Scanner Trailing Edge Registration (Synchro-Cut)